BarePhone Privacy Policy
Last updated: 5 November 2026
BarePhone reads the sensors and hardware of the iPhone it runs on and shows you what they report. This policy describes everything the app does with that information. It is short because the app does very little.
Summary
- Your sensor readings, including face data from the TrueDepth camera, never leave your device and are never stored.
- There is no account, no advertising, no tracking and no third-party analytics.
- The app sends one anonymous launch counter with no identifiers.
Your sensor readings never leave your device
Every reading BarePhone shows you, including motion, pressure, sound, light, camera parameters, processor load, memory, storage, battery, network throughput, location, depth, face tracking, display state and everything else, is read, displayed and discarded on your iPhone. None of it is transmitted, uploaded, stored on a server, or shared with anyone.
There is no account, no sign-in, no profile, no advertising and no tracking. BarePhone does not use any third-party analytics or advertising SDK.
Face data (TrueDepth camera)
On iPhones with a TrueDepth camera, the DEPTH panel offers a Face mode. Face mode is the default on iPhones without a LiDAR scanner and can be selected on the others. Only while the DEPTH panel is open in Face mode, BarePhone uses Apple's ARKit face tracking to show what the TrueDepth camera measures: the face mesh drawn as a wireframe, the 52 facial expression coefficients (blendshapes) that ARKit reports, and the position, rotation and distance of your head relative to the phone.
What data is collected: the face mesh, the blendshape coefficients and the head position, rotation and distance provided by ARKit, while Face mode is on.
How it is used: only to draw these readings on your screen, live, while the panel is open. Face data is not used to identify you, to authenticate you, for advertising, for analytics, or to train any model.
Storage and retention: face data is processed in memory, frame by frame, and is never written to disk, saved to the photo library, or kept after the frame is drawn. When you leave the panel or switch Face mode off, the face tracking session stops and the readings are cleared. Because nothing is stored, there is nothing to delete.
Sharing: face data never leaves your device. It is not transmitted to the developer, to Apple, or to any third party.
Your choice: Face mode starts only after you grant camera access. You can withdraw it at any time in iOS Settings > BarePhone > Camera. The rest of the app keeps working.
What the app does send
BarePhone sends one thing: a count of its own launches.
When the app starts, it sends a single message to a server operated by the developer. That message says only that a launch happened and that it came from BarePhone. Once per installation, the first launch is counted separately, so the developer can tell how many downloads turned into a first use.
That message contains no identifier of any kind: no account, no device identifier, no advertising identifier, no location, and no sensor data. It is a counter being incremented. Nothing in it can be linked back to you, to your device or to any reading the app displayed.
As with any request over the internet, the server sees the originating IP address at the moment of the request. It is not stored and is not used to identify anyone.
Permissions the app asks for
BarePhone asks for system permissions only to read the corresponding sensor and display it to you on screen:
- Motion & Fitness: accelerometer, gyroscope, magnetometer, barometer and step count
- Camera: to list the camera modules, show a live exposure, ISO and shutter readout, and run the depth cameras (LiDAR and TrueDepth)
- Microphone: to draw the waveform, spectrum and spectrogram
- Location: to show the satellite receiver's position, speed, course and its own error estimates
- Bluetooth: to list nearby devices with signal strength
- Local Network: to show network interfaces and services
Declining any of them is a supported state: the corresponding panel says DENIED and the rest of the app works normally. You can change any permission at any time in iOS Settings > BarePhone. Data from these sensors is used only to draw the panel in front of you, in the moment, and is never recorded or transmitted.
Children
BarePhone is not directed at children and collects no personal information from anyone, including children.
Changes to this policy
If the app ever starts sending anything beyond the launch counter described above, this policy and the App Store description will be updated before that version ships.
Who publishes BarePhone
This privacy policy applies to the BarePhone app for iPhone, published on the App Store by Jan Ĺšlusarz (Grifworks), Poland.
Contact
Questions about this policy or your data: jan.slusarz@gmail.com